115
14.13.7 Wireless LAN Failure Diagnosis
14.13.7.1 Between ID Micon and Wireless LAN Module Failure Detect Condition
When module and ID micon (CN-LAN) communication is following below condition.
o No response against sending data.
o Reply error against sending data.
o Regularly sending from AC unit (Every 1 minutes).
Either one from above condition occur, detection will start.
If for certain time there is no communication and retry is implemented 3 times continuously confirm the error by
following below table.
When failure diagnosis H85 occur.
Wireless LAN LED Timer LED
When error condition check Light up No light
When retry Light up No light
After confirm failure No light Blinking
Cancel Condition: From the module the reply data or the regularly sending data (normal data) is recognized by ID
micon.
Wireless LAN LED Timer LED
When failure canceled Light up No light
Failure communication parameter setting.
H85 communication error: time/retry counter 10 min/3 count
Wireless LAN disconnection judgment time 300 sec
14.13.8 Between ID AC and Broadband Router Failure Detect Condition
Detect condition: Communication with router is interrupted.
Confirm condition: The interrupted condition continue more than 5 minutes and retry is implemented.
After confirm the failure operation: Not H85 error display and Wireless LAN LED is blinking.
Cancel condition: Communication is return between Wireless LAN router.
After cancel, return to normal operation and Wireless LAN LED is light up.
To Next Page
Loading...
