Panasonic CZ-RWS3

ENGLISH
21
(EN)
4. Press / to select the ap direction, then press .
• Every time you press / , it cycles from“ (Unlock)↔
(Swing) ↔ ↔ ↔ ↔ ↔ ” .
5. Press .
• You can return to Step 2 to continue setting if you press instead of
.
Note
• Press to stop operation in the middle.
nanoe™ X Setting
1. Press
nanoeX
during operation.
• You can toggle between ON and
OFF each time you press
nanoeX
.
• “ ”isdisplayedwhenthis
setting is ON.
• When the nanoe™ X setting is
ON,“nanoe”(atomisedwater
particle) is released from the
indoor unit while in operation
(Cool, Dry, Heat, Fan, Auto).
• If the receiver emits 1 short beep
followed by 1 long beep after
pressing
nanoeX
, the indoor unit
does not support this function.
See page 30 for how to enable
or disable the button.
• “ ”isdisplayedifthefunctionisnotavailable.
1