Panasonic CZ-RWS3

24
(EN)
Temperature Automatic Return
You can restore the changed temperature to the originally set temperature
automaticallyafteraspeciedtimeelapses.
• Set the time and temperature for each operation mode.
1. Press and at the
same time for 4 seconds or
longer.
• “  ”startsblinkingandthe
setting screen is displayed.
2. Press to select the
operation mode, then press
.
• Every time you press to
switchbetween“Dry / Cool
→Heat →Auto ”,the
buzzer sounds from the
corresponding receiver.
• When not set: 1 short beep
• When already set: 2 short
beeps
3. Press / to set the time
to return to the set
temperature.
• Setting range: 10 to 240 min (by
the 10 min)
4. Press / to set the
temperature, then press
.
MAX (°C) MIN (°C)
Auto
27 17
Heat
30 16
Dry
/ Cool
30 18
• The temperature range that can be set varies depending on the model.
5. Press .
• You can return to Step 2 to continue setting if you press instead of
.
2, 5
6
2
1, 4
1, 3
Temperature
Time
(min)
Operation mode