Panasonic CZ-RWS3

18
(EN)
Operation
Hold the remote controller with your hand and point its transmitter at the
receiver.
Power: Turn on the circuit breaker beforehand, referring to the
operating instructions for the unit.
1. Press
.
2. Press
to select the
operation mode.
• Every time you press , it
cyclesfrom“Auto →Heat
→Dry →Cool →Fan ” .
• Models that only provide the
cooling function cannot operate in
the Auto or Heat mode.
• The available functions differ
depending on the indoor unit
being used. See page 28 for
how to change the operation
mode display.
3. Press
to select the fan
speed.
• Every time you press , it
cyclesfrom“ →  →  → 
→  →  (Auto)”.
• Auto does not work in Fan mode.
• If the unit is not heating very
effectivelywithafanspeed“ ”,
switchthefanspeedto“ ”or
“ ” .
• The available functions differ
depending on the indoor unit
being used.
• “ ”isdisplayedifthefunction
is not available.
2
4
1
3
5