28
RQT9167
Advanced Timer Recording
Manual timer recordings
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
FRI 10/10/08 12:54:00
Mode
StopStart
No.
Date
STTL
HDD
DVD
Name
Drive
space
New Timer Programme
, to select “New Timer
Programme”, then
OK
, to move through the items
and , to set the items.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
FRI 10/10/08 12:54:00
RETURN
OK
Number
--
09
Mode
StopStartName Date
STTL
HDD
DVD
-- : ---- : --
-- / -- ---
------
Programme Name
Please set Channel.
Change
Profile
SP
All Services :
-----
Name: – TV Station Name/External Input
When recording satellite programmes,
select “AV2”.
You can press the “Blue” button to
change the category
[e.g., Free Services, Radio, Registered
Profiles (¼ 60, Edit Profiles)]
Date: – You can set a daily or weekly programme
(¼ right, Tips).
Start (start time)/Stop (end time):
– Hold button to change in 30-minute
increments or decrements.
Drive: – HDD or DVD
When the recording drive is “DVD” and
there is not enough remaining space,
recording automatically switches to the
“HDD” (
¼ 31, Relief Recording).
Mode
– Recording mode (¼ 24)
STTL [Subtitles (¼ 42)]:
– ON/OFF
RENEW:
([HDD])
– Auto Renewal Recording (¼ 31)
ON/OFF
Programme Name:
Press [OK] (¼ 43, Entering Text).
Preparation:
Turn on the television and select the appropriate
video input to suit the connections to this unit.
]RAM\
If the disc is protected, release protection (¼ 58).
Insert a disc with enough remaining blank space.
Confirm that the clock on the unit’s display is set to
the correct time.
If connected via a satellite receiver, set channel
there before timer recording starts.
OK
– The timer icon is displayed in the left column.
– “” lights on the unit’s display to indicate
timer recording standby has been activated.
– Repeat steps – to programme other
recordings.
– Press [ DVD] to turn the unit off.
Notes
“” on the unit’s display fl ashes when the unit cannot go to timer
recording standby.
If two timer recording times overlap, the fi rst recording always
has priority. The second recording will start only after the fi rst
recording has fi nished.
Recorded subtitles cannot be deleted later.
A Timer Recording will not start while a disc is being formatted,
deleted or fi nalised. The recording begins afterwards.
When “Name” is set in AV1, AV2 or AV3, STTL setting is unavailable.
Tips
To exit the timer recording list
Press [PROG/CHECK].
“Date” Setting
Each press of [] changes items in the order below.
(Each press of [] changes items in the reverse order.)
Current date One month later
minus one day
Weekly timer Daily timer
SUN-SAT
MON-SAT
MON-FRI
SAT
SUN
---
Titles recorded using the same daily or weekly timer are bundled
and displayed as a “group” in the Direct Navigator screen (¼ 35)
except when using Auto Renewal Recording.
You can also use the numbered buttons to enter “Name”, “Date”,
“Start” and “Stop”.
You can also press [DRIVE SELECT] to switch the drive, [REC
MODE] to switch “Mode” and press [ STTL] to switch “STTL”.
DMR-EX768EB.indb28DMR-EX768EB.indb28 2008/03/0610:02:392008/03/0610:02:39