Press OK to store new programme.
No.
Timer Recording screen icons
: Timer programme is active.
: Currently recording
: Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
fi nishes recording.
: You stopped a weekly or daily timer recording. The icon
disappears the next time the timer recording starts recording.
: The disc was full. (not enough space)
: The TV programme may not be recorded due to copy-
protect.
: Recording stopped (Dirty disc, etc.)
: Timer programmes set to Auto Renewal Recording
(¼ 31).
: Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
Drive space
OK: Recordable
¼ (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to one
month ahead from the present time) based on the time
remaining on the disc.
!: It may not be possible to record because:
– there is no more space left.
– the number of possible titles has reached its maximum.
Relief: Timer programmes that will be relief recorded to the HDD.
Channel name, programme name and other
information are displayed.
Notes
Recording may fail if there are changes to the station’s
programming.
“” disappears from the unit’s display when no timer programme
is set or when all timer programmes are deactivated.
“-------” is displayed on a series recording item if there will be no
episode of the series for the next 8 days. We recommend you
delete the “-------” item after you confi rm the last episode of the
series is recorded.
The “Guide Link” function may not work if you manually change
the stat/end time by over 10 minutes.
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
Tips
You can enter up to 32 programmes a month in advance.
You can also delete a programme with the following steps
1. Press [, ] to select the programme and press [OPTION].
2. Press [, ] to select “Delete” and press [OK].
To exit the timer recording list
Press [PROG/CHECK].
then follow the on-screen
instructions to resolve overlapping.
–
If the programme was set from the TV Guide,
the available repeat programmes are displayed.
Pres
s [, ] t
o select, then
press [OK].
The timer recording list can be viewed even when the
unit is off.
After performing step (¼ left)
(Red)
– “” (¼ left) disappears from the timer
recording list.
– Press the “Red” button again to activate timer
programme.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform step (¼ left)
1. Press [OPTION]
2. Press [, ] to select “Timer Off”, then press [OK].
Advanced Timer Recording
To Next Page
Loading...
Need help?
General
