Panasonic Diga DMR-EX768EB - Page 39

39
RQT9167
Tips
To stop the Slide Show
Press [ STOP].
To change the rate at which pictures are displayed
1 In step  above, press [, ] to select “Slide Show Setting”,
then press [OK].
2 Press [, ] to select “Display interval”.
3 Press [, ] to select desired interval (0 to 30 seconds), then
press [OK].
To repeat play
1 In step  above, press [, ] to select “Slide Show Setting”,
then press [OK].
2 Press [, ] to select “Repeat Play”.
3 Press [, ] to select “On”, then press [OK].
Advanced FeaturesAdvanced Features
Notes
To return to the picture to its original position
Press [, ] to select the opposite rotation in step , then press
[OK].
 Rotation information will not be stored.
Rotate Pictures
Rotate RIGHT
Rotate LEFT
Zoom in
OK
RETURN
,  to select “Rotate
RIGHT” or “Rotate
LEFT”, then
OK
While playing a picture
OPTION
Zoom
While playing a picture
OPTION
To zoom in:
Rotate RIGHT
Rotate LEFT
Zoom in
OK
RETURN
,  to select “Zoom
in”, then
OK
Notes
To return to the picture to its original size
Press [, ] to select “Zoom out” in step , then press [OK].
 When zooming in, the still picture may be cut off.
 “Zoom in” information is not stored.
 “Zoom in” and “Zoom out” do not work with images that have a
resolution larger than 640480 pixels.
Slide Show
You can display still pictures one by one with constant
interval.
From the Album View screen
, , ,  to select an album, then
PLAY/x1.3
You can also start Slide Show with the following
steps.
 From the Album View screen
Press [, , , ] to select the desired album,
then press [OPTION].
 Press [, ] to select “Start Slide Show”, then
press [OK].
Picture Properties
While playing a picture
STATUS
twice to display picture properties.
18:53:50 11/10.
Folder - Picture No. 103 - 0006
Date 1/ 1/ 2005 No. 3 / 9
Shooting Date
STATUS
again to exit.
Notes
 Depending on the camera or editing software; shooting
dates may not be displayed correctly.
Picture information is shown (e.g., shooting date).
,  to select “Properties”, then
OK
Information (e.g., image size and fi le size) is
shown.
–To exit the Properties screen, press [OK].
From the Picture (JPEG) View screen
, , , to select the picture,
then
OPTION
Or
6-41.indd396-41.indd39 2008/03/0710:55:272008/03/0710:55:27