10
RQT9079
STEP
2
Channel reception settings and TV aspect settings
1 Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2 Press [Í DVD] to turn the unit on.
[For]France,[Italy,[Spain[and[Switzerland]
≥Country setting screen appears on the television.
Press [3, 4] to select the country and press [OK].
≥DVB Auto-Setup starts.
The unit will search for the terrestrial digital channels. TV
channels will be located and stored ready for use.
This takes 5-10 minutes.
When DVB Auto-Setup is completed, analogue Auto-Setup
starts. This takes about 8 minutes.
≥When the channel could not be received properly, adjust
the position and direction of the aerial.
[For]Germany[ When using an indoor antenna,
– make sure that there is nothing causing interference.
– switch “Active Antenna” to “On” in the Setup menu (➡ 66)
if the antenna is not equipped with power supply.
Then repeat the Auto-Setup.
After analogue Auto-Setup is complete, TV aspect setting
screen appears.
≥If you selected “Schweiz”, “Suisse” or “Svizzera” in the
Country setting, the “Power Save” setting menu appears
after analogue Auto-Setup is complete. Select “On” or “Off”
(➡ 66).
Then TV aspect setting screen appears.
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(➡ 84).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(➡ 84).
3 Press [3, 4] to select the TV aspect
and press [OK].
When television picture appears, set up is complete.
If the confirmation screen of GUIDE Plus+ data download
appears, perform the following steps.
(For information about GUIDE Plus+ system ➡ 19)
4 Press [2, 1] to select “Ja” and press
[OK].
5 Press the numbered buttons or
[3, 4, 2, 1] to enter your postal
code and press [OK].
GUIDE Plus+ data download starts. This takes about 30
minutes.
6 When the download has finished
Press [OK].
Set up is complete.
To stop partway
Press [RETURN].
[Note]
≥When this unit is not operated for approximately 5 minutes while
the screen is being displayed, the screen saver is displayed. To
return to the previous screen, press [OK].
[For]Germany[
Only the Auto setup screens are displayed in German in the
operating instructions. After completing step 5, change the
on-screen display to English in the following steps.
1 Press [FUNCTION MENU].
2 Press [3, 4] to select “Weit. Funktionen” and press [OK].
3 Press [3, 4] to select “Setup” and press [OK].
4 Press [3, 4] to select “Display” and press [1].
5 Press [3, 4] to select “Sprachauswahl” and press [OK].
6 Press [3, 4] to select “English” and press [OK].
7 Press [EXIT].
STAT US
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAU SE
STOP
SLOW/SEARCH
SKIP
ShowView
CH
PAG E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
AV
¦
TV
DRIVE
SELECT
¦
DVD
VOL
DELETE
PROG/CHECK
EXIT
OK
OPTION
¦DVD
,,,
OK
RETURN
FUNCTION MENU
EXIT
Numbered
buttons
Country
RETURN: leave OK: access
España
OK
RETURN
SELECT
France
Italia
Schweiz
Suisse
Svizzera
DVB Auto-Setup
Bitte warten! Kan 5 69
Prog. QualitätKanal Sender Name Net ID TS ID
RETURN
RETURN: Abbrechen
ABC
ABC 2
352
354
1
2
12302
82041
12302
82041
9
9
Sendersuchlauf
Kan 4
Suche analoge Sender, bitte warten.
RETURN: Abbrechen
RETURN
∫ If the clock setting menu appears
Set the clock manually (➡ 66).
∫ To confirm that stations have been tuned
correctly (➡ 62)
∫ To restart set up (➡ 61)
16:9
Pan & Scan
Letterbox
4:3-TV
OK
RETURN
SELECT
TV Bildschirmformat
16:9-Breitbild-TV
Postleitzahl
Gewähltes Land : XXXXXX
Dieses Gerät aktualisiert die
GUIDE Plus+ Daten
mehrmals pro Tag.
Nummer
OK
CHANGE
0
9
LL
RETURN
DMREX78&88EG&EC&EF-RQT9079-L_eng.book 10 ページ ２００８年２月２７日 水曜日 午後３時１１分
To Next Page
Loading...
