With Other Equipment
VQT4L31
54
Copying the HD Video or the SD Video
§
§
“For data files” only
e.g., Connecting to the Panasonic video camera
• If you connect a Panasonic product with a USB connection
cable, setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the
connected equipment.
[USB_HDD] [SD] [USB], video camera, etc. > [HDD]
• The original file must be in the AVCHD standard.
1 Connect the video camera or insert the
media.
• Make the video camera ready for data
transfer.
The menu screen appears. (> 36)
2 Select “Copy Video ( AVCHD )”, then press
[OK].
3 Select the title, then press the yellow button.
A check mark is displayed. Repeat this step.
• Press the yellow button again to cancel.
(All the recordings on the same date
become a title.)
4 Press [OK].
5 Select “Start”, then press [OK].
• It may take time for the copying to start.
To stop copying
Press and hold [RETURN ] for 3 seconds.
• An AVCHD title with 100 or more scenes will be divided into
titles every 99th scene and copied.
This unit cannot copy the titles in the HDD to
the media. Be careful when deleting the
original title after copying to the HDD.
USB connection cable
(optional)
Copying HD Video (AVCHD)
Screen icons
(NTSC)
(PAL)
Title recorded using a different
encoding system from that of the
unit.
• Titles displaying these marks
cannot be selected.
Time
Rec time
Size 200 MB
0:30
9:00 AM
HDD
Copy Video ( AVCHD ) Destination Capacit
Siz
SD
002
003
004 AVCHD
AVCHD
AVCHD
AVCHD
001
No. Channel
DMRPWT635GL_eng.book 54 ページ 2013年2月4日 月曜日 午後1時25分