Wi-Fi/NFC
Operating the camera using a smartphone/tablet
SQW0206
- 215 -
Select [Via Network] or [Direct] and press [MENU/SET]
●
When connecting with [Via Network]
(On the camera)
Connect the camera to a wireless access point (→250)
(On your smartphone)
Set Wi-Fi function to “ON”
Select the wireless access point you connected to the camera, and set
Start “Image App” (→193)
●
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]
(On the camera)
Connect the camera to a smartphone (→253)
(On your smartphone)
Start “Image App” (→193)
●
When connecting with [Manual Connection] in [Direct] (→195)
Select the device you wish to connect to
• When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button. (→258)
Take still pictures
• The still pictures are sent automatically after taking them.
• To change the setting or disconnect, press [Wi-Fi] button.
You cannot change the settings while sending still pictures. Wait until sending is
complete.
To Next Page