Wi-Fi/NFC
Using WEB services
SQW0206
- 232 -
■
Sending a picture each time one is recorded ([Send Images While
Recording])
Select [New Connection] in the [Wi-Fi] menu, and press
[MENU/SET] (→61)
Use cursor button to select [Send Images While Recording],
and then press [MENU/SET]
Use cursor button to select [Web service], and then press
[MENU/SET]
Select [Via Network] and connect (→250)
Select a WEB service you want to connect
• When the connection is established, the confirmation screen for the transmission
setting is displayed. Check the setting and press [MENU/SET]. To change the
send setting, press the [DISP.] button. (→258)
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button. (→190)
You cannot change the settings while sending still pictures. Wait until sending is
complete.
To Next Page
Loading...
