Panasonic DMR-BCT940 - General Information for Basic Connections

Getting started
SQT0292
18
Connection
To connect and register the USB HDD
(optional)
Refer to “Registering the external HDD
(USB HDD)”. (> 82)
About HDMI cable
Use the High Speed HDMI cables.
Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s
HDMI cable.
When outputting 1080p signal or 24p(4K) signal,
please use HDMI Cables 5.0 meters or less.
• This unit cannot connect the TV that does not have the
HDMI terminal.
• The HDMI connection supports VIERA Link “HDAVI
Control” (> 84).
• You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display properly
or at all when connecting with a DVI/HDMI switching cable.
(Audio cannot be output.)
• If you are connecting to a TV that is only compatible with
2 channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
• [BCT940]
Keep the RF coaxial cables as far away as possible from
other cables.
§
A 21-pin Adaptor is required for
AUDIO/VIDEO terminal.
General information for Basic
connections
When the unit is not to be used for a long
time
To save power, unplug it from the household
mains socket. This unit consumes a small
amount of power, even when the unit is in
standby mode.
[BCT940 ]
[approx. 0.2 W (“Quick Start” is not activated
and “RF OUT ( Aerial Signal )” is set to
“Off”)]
[BST940]
[approx. 0.2 W (“Quick Start” is not
activated)]
Connect the Set Top Box or video equipment
AV
Set Top Box or video equipment
21-pin Scart cable
§
DMR-BST_BCT940EG_eng.book 18 ページ ２０１４年７月２日 水曜日 午後５時４０分