EasyManua.ls Logo

Panasonic DMR-BCT940 - Easy Network Setting

Panasonic DMR-BCT940
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting started
SQT0292
26
Settings
8 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 98)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
Select “Yes” to proceed to “Easy Network
Setting”. (> right)
Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 22)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select the search mode, then press [OK].
5 Select “Yes”, then press [OK].
If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 92)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 30)
If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
After completing “Easy Setting”, you can continue
with “Easy Network Setting”.
1 Select “Wired” or “Wireless”, then press
[OK].
3 When “Easy Network Setting is finished.”
appears.
Press [OK].
Easy Network Setting
2 Follow the on-screen instructions and make
the following confirmation and settings.
“Wired” connection:
- Home Network Connection Check
- Home Network function
- Remote Viewing and Recording
- Internet Connection Test
“Wireless” connection:
Before beginning wireless connection
setup obtain your Network name (SSID).
An SSID (Service Set IDentification) is a
name used by wireless LAN to identify a
particular network. Transmission is
possible if the SSID matches for both
devices.
- Wireless Connection Check
- Home Network Connection Check
- Home Network function
- Remote Viewing and Recording
- Internet Connection Test
OK
RETURN
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Select “Wireless”.
Current setting : Wired
Wired
Wireless
DMR-BST_BCT940EG_eng.book 26 ージ 2014年7月2日 水曜日 午後5時40分

Table of Contents

Related product manuals