Getting started
SQT0292
24
Settings
8 Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
9 Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 98)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> 26)
• Select “No” to finish the Easy Setting.
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
1 Press [FUNCTION MENU]. (> 22)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
• If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 89)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 30)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 118)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
DMR-BST_BCT940EG_eng.book 24 ページ ２０１４年７月２日 水曜日 午後５時４０分
To Next Page
Loading...
