Panasonic DMR-BCT940

To Next Page

To Previous Page

Convenient functions

SQT0292

Basic Settings

Settings for DVB-C Channels

[DVB-C]

Channel List

You can edit the channel list.

• To hide/reveal channels

1 Select the channel.

2 Press [OK].

The check mark is removed/displayed.

• Red: Change the sorting mode.

• Yellow: Reveal all channels.

• Blue: Change the Category.

• To change the channel number assignment

1 Select the channel to change, then press

the green button.

2 Enter the channel number to reassign

with the number buttons.

3 Press [OK].

Manual Tuning

You can add new channels manually.

1 Adjust the frequency, symbol rate and

service ID. (For details, consult the cable

provider.)

• Adjust the frequency by checking the

signal strength and signal quality

displays.

2 Select “Start scan”, then press [OK].

• The set channel is displayed in the table.

• This function is not available during an Operator

profile update. (> 32)

Update Channel List

You can update the channel list to the latest

one.

• This function is not available during an Operator

profile update. (> 32)

Signal Condition

You can check the quality and strength of

signals.

Press [CH WX] to select the channel.

• When the signal is too strong (red bar), reduce the

CATV signal. (For details, consult your dealer or the

cable provider.)

• When the signal is weak, check that the current

broadcast channel is correctly broadcasting.

New Channel Message

Set whether to obtain the information

automatically when a new DVB channel is

added.

Settings for DVB-T Channels

[DVB-T]