19
3.8. Wi-Fi Module (Internal) Malfunction Check (Simplified Method)
3.8.1. Procedure of the Module (Internal) Malfunction Check
3.8.1.1. Method of Wireless LAN Setting
1. Press [FUNCTION MENU].
2. Select "Basic Settings" in "Setup", then press [OK].
3. Select "Network Settings" in "Network", then press [OK].
4. Select "Wireless" in "LAN Connection Mode".
5. Press [OK]. The following "Wireless Setting screen (example)" is displayed.
3.8.1.2. Method of displaying Wireless LAN Module Version
1. Press [FUNCTION MENU].
2. Select "Basic Settings" in "Setup", then press [OK].
3. Select "System Information" in "Others".
4. Press [OK]. The following "System Information screen (example)" is displayed.
To Next Page
Loading...
