9
3 Service Navigation
3.1. External HDD (USB HDD)
Please use a confirmed USB HDD
For the latest information on confirmed USB HDDs, please check the following website.
http://panasonic.jp/support/global/cs/
• Certain non-confirmed USB HDDs cannot be used with this unit.
• If a problem occurs with the USB HDD, please contact the manufacturer of the device.
3.1.1. Connecting the USB HDD
Connect this unit with optional USB HDD.
• Only one USB HDD can be connected at the same time.
• Do not connect additional HDDs using a USB hub.
• For details about connection method, refer to the
instructions supplied with the USB HDD.
3.1.2. Disconnecting the USB HDD
Please use the following procedure to disconnect.
Disconnecting without following this procedure may result in the loss of recorded content from the USB HDD or the internal HDD.
1. Press [FUNCTION MENU].
2. Select "Basic Settings" in "Setup", then press [OK].
3. Select "Settings for USB HDD" in "HDD/ Disc/ USB HDD", then press [OK].
4. Select "USB HDD Disconnection", then press [OK].
5. Select "Yes", then press [OK].
6. Disconnect the USB HDD from this unit.
3.1.3. Registering the USB HDD
3.1.3.1. Registering the USB HDD
• If you intend to move recorded titles to a USB HDD, the USB HDD must be registered to this unit first.
Limitation information:
- A USB HDD with a capacity of less than 160 GB cannot be used.
- Registering of a USB HDD will format the USB HDD and all the content already recorded will be deleted.
- Up to eight USB HDDs can be registered on this unit.
- Registered USB HDDs cannot be used with devices other than this unit.
• If the registering screen appears when connecting the USB HDD, go to step 5.
1. Press [FUNCTION MENU].
2. Select "Basic Settings" in "Setup", then press [OK].
3. Select "Settings for USB HDD" in "HDD/ Disc/ USB HDD", then press [OK].
4. Select "USB HDD Registration", then press [OK].
5. Select "Yes", then press [OK].
• If you have already registered eight USB HDDs, it will be necessary to delete one or more of them before registering a new
USB HDD.
The message screen appears:
a. Select "Yes", then press [OK].
b. Select the USB HDD to cancell, then press [OK]. The confirmation screen appears.
To Next Page
Loading...
