30
3. USB-HDD Diagnosis
<Diagnosis Result Value>
Example: USB-HDD is not recognizable.
0 No abnormality was detected from USB-HDD inspection.
Please check other diagnosis items.
1 No USB-HDD is connected or some other device is connected. Check to see if
there is any problem with the USB cable connection or the voltage power sup-
ply.
If there is no problem with the supply voltage or connection, there is a high pos-
sibility of USB-HDD unit defect.
2 An abnormality that can be determined as USB-HDD failure was detected.
Replace the USB-HDD unit.
6 If multiple USB-HDD units are connected.
7 If an unsupported USB-HDD is connected.
8 Unable to execute the Diagnosis Code Function normally.
There is a possibility of malfunction in the digital P.C.B. side.
Other The Input Code is not correct. Please check the Diagnosis Code again.
To Next Page
Loading...
