Panasonic DMR-BWT955GL - Deep Colour Initialization; CS reset; Diagnosis Code display

44
Deep Colour Initialization The Deep Colour setting is initialized.
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
-"00 RET" is displayed on the unit's
disply.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "07 DC" is displayed on the
unit's display.
Press and hold [OK] on the
remote control or [OPEN/CLOSE]
on the unit for at least 3 seconds.
CS reset Reset the information about the following Ser-
vice Mode.
• Error History
• BD Drive Last Error
• Error Code
• HDD Spin-up time
• Laser Used Time
While the unit is on, press and
hold [5], [9] and [R] on the remote
control at the same time for more
than 5 seconds.
-"70 RET" is displayed on the unit's
disply.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "93 FIN" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit for at
least 3 seconds.
Diagnosis Code display Display the Diagnosis Code
While the unit is on, press and
hold [5], [9] and [R] on the remote
control at the same time for more
than 5 seconds.
-"70 RET" is displayed on the unit's
disply.
Repeatedly press
[ ] on the
remote control or [POWER] on the
unit until "96 DIC" is displayed on
the unit's display. .
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Item
FL Display Key Operation
Mode Name Description