Error
Code
Diagnosis contents Description Monitor
Display
FL
F00 No error information Initial setting for error code in
memory
(Error code Initialization is
possible with error code
initialization and main unit
initialization.)
No display
Displayed is
F01 Drive hardware error Display appears when drive unit
error is detected. The event is
saved in memory.
No display
Displayed is
F12 Initialization error
when main
microprocessor is
started up for program
recording
Display appears when
initialization error is detected
after starting up main
microprocessor for program
recording. The event is saved in
memory.
The power is turned off when
detecting.
No display
Displayed is
UNSUPPORT
Unsupported disc error *An unsupported format disc was
played, although the drive starts
normally.
*The data format is not
supported, although the media
type is supported.
*Exceptionally incase of the disc
is dirty.
“This disc is
incompatible.”
Display for 5
NO
READ
Disc read error *A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not
be read.
“Cannot read.
Please check
the disc.”
HARD
ERR
Drive error The drive detected a hard error. “DVD drive
error.”
Display for 5
SELF
CHECK
Restoration operation Since the power cord fell out
during a power failure or
operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does
not disappear, thereis the
possibility that defective Digital
P.C.B. / RAM drive.
No display
Full
Program
16 programs are
already set.
16 programs are already set. No display
15
To Next Page
Loading...
