11. Assembling and Disassembling
11.1. Disassembly Flow Chart
The following chart is the procedure for disassembling the casing and inside parts for internal
inspection when carrying out the servicing.
To assemble the unit, reverse the steps shown in the chart below.
11.2. P.C.B. Positions
11.3. Top Case
1. Remove the 2 screws (A) and 3 screws (B).
2. Open the both ends at rear side of the Top Case a little and lift the
Top Case in the direction of the arrows.
25
To Next Page
Loading...
