27
RQT7301
Playing back
This function works only when the elapsed play time is displayed.
§
Only when you have selected “480P” in “TV Type” (➡ page 14).
Play menu–Change play sequence
Repeat play
≥All [VCD] [CD] (excluding MP3 discs)
≥Chapter [RAM] [DVD-R] [DVD-V]
≥Group [DVD-A] [CD] (MP3 discs only)
≥PL (Play list) [RAM]
≥Title [RAM] [DVD-R] [DVD-V]
≥Track [DVD-A] [VCD] [CD]
Select “OFF” to cancel.
Video menu–Change picture quality
Picture
≥Normal: Default setting
≥Soft: Soft picture with fewer video artifacts
≥Fine: Details are sharper
≥Cinema: Mellows movies, enhances detail in dark scenes.
MPEG-DNR
Reduces noise and picture degradation.
Progressive
§
(➡ page 40)
Select “ON” to enable progressive output.
≥Select “OFF” if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be
displayed.
Transfer
§
(When “Progressive” is set to “ON”.)
Select the method of conversion for progressive output to suit
the type of material being played (➡ page 40, Film and
video).
≥Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
≥Auto2: Compatible with 30 frame-per-second film content
in addition to 24 frame-per-second film content.
≥Video: Select when using Auto1 and Auto2, and the
video content is distorted.
Audio menu–Change sound effect
V.S.S. [RAM] [DVD-R] [DVD-V]
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front
speakers only.
≥Turn V.S.S. off if it caused distortion.
≥V.S.S. does not work for SAP recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a center channel)
The volume of the center channel is raised to make dialog
easier to hear.
7301en.book 27 ページ ２００４年３月１日 月曜日 午後５時３５分
To Next Page
Loading...
