Memory No.
(Error No.)
Reason Automatic display Memory
H01 The cylinder could not be started.
(Error of the cylinder or the cylinder driver.)
Yes Yes
H02 The CAP FG could not be detected. Yes Yes
F03 Mechanism lock during without the unloading and the
cassette-up.
Yes Yes
F04 Mechanism lock during unloading Yes Yes
F05 S-reel pulse cannot be detected when a cassette tape is
inserted.
(Error of the S-reel system or the Capstan system.)
No Yes
F06 Mechanism lock during the Cassette-up. Yes Yes
H07 The recording circuit can not be operated in REC mode. Yes Yes
H08 The recording circuit is operated in except for REC mode. Yes Yes
U11 Cylinder clogs during the PLAY mode. Yes Yes
F15 S-reel pulse cannot be detected when a cassette tape is
inserted.
(Error of the S-reel system or the Capstan system.)
No Yes
H16 Detection of the Cylinder lock during the constant rotation No Yes
H17 Detection of S-reel lock during the constant tape running Yes Yes
H18 Detection of T-reel lock during the constant tape running Yes Yes
F20 NG1 in the PG Shifter Automatic Adjustment
(The cylinder rotation is unstable during the automatic
adjustment.)
Yes Yes
F21 NG2 in the PG Shifter Automatic Adjustment
(The vertical sync signal is lacked while over 5 seconds
on the alignment tape.)
Yes Yes
58
To Next Page
Loading...
