Tape Type The aim of Tape position between the starting edge
and the finishing edge
60 min. or less type (Large Hub) The Tape position is divided into 6 stages between
the Tape beginning edge: "A " and the Tape end
edge: "5".
90 min. or over type (Small Hub) The Tape position is divided into 14 stages between
the Tape beginning edge: "E " and the Tape end
edge: "1".
"A" and "E" is hexadecimal. "A" =10 (Decimal), "E" =14 (Decimal).
Hexadecimal indication from "A" to "E" are shown below.
Note 3: Supplementary Data 2 (Reason of Ejection)
71
To Next Page
Loading...
