13.8. I/O P.C.B.
At first, disconnect one connector on one side of I/O P.C.B, and pull out the I/O P.C.B.
13.9. VTR Mechanism Unit
1. Disconnect 3 Connectors (P1531, P2501 and P4002).
2. Remove 3 Black Screws (A), Screw (B) , Screw (C) and Screw D).
3. Lift up VTR Mechanism Unit perpendicularly so to disconnect
Connectors (P2571 and P3001).
Note:
When you lift up VTR Mechanism Unit, because connections of P2501 and P3001 are tight, pay
attention to that.
45
To Next Page
Loading...
