12.8. LED P.C.B. and DV Jack
P.C.B.
1. Remove a Screw (A) to remove SD Card P.C.B. Angle with
DV Jack P.C.B..
2. At first disconnect the connector on one side as shown
below, and pull out LED P.C.B.
12.9. DVD-RAM Drive
1. Remove 3 Screws (A) to remove DVD-RAM Drive.
2. Lift up DVD-RAM Drive slightly and remove FFC and
remove Cable between DVD-RAM Drive and Main P.C.B.
26
DMR-EH60PC / DMR-EH60PL / DMR-EH60GT