Panasonic DP-180

35
Function
Exits this
Function
Mode
When selecting the Key
Operator Mode:
(ex. General Settings)
09 KEY OPERATOR MODE
ENTER PASSWORD=_
Input the Key
Operator
Password (3-digit)
(See page 13)
Select a mode with the Cursor
Key or Keypad.
Select a setting with the Keypad.
Confirm a setting with the SET Key.
Copier Settings: Changing the Initial Copy Modes
● Default function of each copy mode
(See page 38)
For Key Operator:
Original setting, Contrast, etc.
(See page 39)
Printer Settings: Changing the Initial Printer Modes
● Default function of each print mode
(See pages 39 and 40)
For Key Operator:
Job completion time, Page protection, Error page print, Spool
function, PS configuration, Font list print, Mailbox data
handling, etc.
(See pages 40 and 41)
NOTE: Normally, you have no need to set the Printer Settings.
When sending the text data from MS-DOS status to the
printer directly, such special printing may require Printer
Settings.
Scanner Settings: Changing the Initial Scanner Modes
● Original default setting, Compression mode, Resolution, etc.
(See page 41)
Fax/Email Settings: Changing the Initial Fax/Email Modes
Refer to Operating Instructions (For Facsimile & Internet Fax/
Email).
Exits this
Function
Mode
Setting the desired
Function Parameter(s).
or
Setting the desired Function
Parameter(s).
Select a mode with the Cursor
Key or Keypad.
Select a setting with the Keypad.
Confirm a setting with the SET Key.
3
3 4 5
4 5 6