54
Network Scanner
■ Direct Connection (with Crossover Cable)
Direct Connection (with Crossover Cable)
Turn OFF* the Power
Switch (Machine and the
PC).
Connect a Crossover LAN Cable between your machine
and the PC.
LAN Cable (Crossover)
To PC
(Rear Side of Machine) (Rear Side of PC)
NOTE: Do not use Standard
LAN Cable.
Turn OFF* and ON the
Power Switch (Machine
and the PC).
Input your PC's IP
Address into the Address
Book in the machine (see
page 48) or into the
Panasonic-DMS software
(refer to the enclosed CD).
Scan the document(s) to
your PC. (See page 46)
NOTE:
*If the Hard Disk Drive Unit (DA-HD19) is installed, see page 13.
LINK
10/100BASE-TX
RX
HANDSET
TEL
LINE
LAN Cable (Crossover)
To
Machine
1
5
2
6 7
To Next Page
Loading...
