Panasonic DP-180

41
Function
03 ERROR PAGE PRINT Select whether to print the error page. 2:ON
1:OFF / 2:ON
04 SPOOL FUNCTION Select whether to enable the spool function. 2:ON
1:OFF / 2:ON
05 TEXT PRINT Select whether to print the text page only. 2:ON
1:OFF / 2:ON
06 PS CONFIGURATION
*
1
Prints the PS configuration page.
PRESS SET TO PRINT
07 FONT LIST PRINT (PCL)
*
2
Sets the PCL printing font list.
PRESS SET TO PRINT
08 FONT LIST PRINT (PS)
*
1
Sets the font list print of PS.
PRESS SET TO PRINT
09 MAILBOX DATA HOLD
*
3
Select the automatic holding time frame for the 7 DAYS
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
10 DELETE MAILBOX
*
3
Select whether to delete the mailbox data. 2:BEFORE
1:ALL / 2:BEFORE
12 APPLETALK ZONE
*
1
Inputs a AppleTalk zone name.
■ Scanner Settings (Scan Parameters)
No.
00 SCANNER SETTINGS Prints the scanner settings.
PRESS SET TO PRINT
01 ORIGINAL MODE Sets the original default setting. 2:TEXT/PHOTO
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
02 COMPRESSION MODE Sets the default compression mode setting. 4:JBIG
1:MH / 2:MR / 3:MMR / 4:JBIG
03 RESOLUTION Sets the default resolution setting. 2:FINE
1:STANDARD 2:FINE 3:S-FINE
05 FILE TYPE/NAME Selects the XMT default file format. 1:TIFF/JPEG
1:TIFF/JPEG / 2:PDF
Modes Function
Initial
Setting
■ Printer Settings (For Key Operator) (Continued)
No.
Modes Function
Initial
Setting
*
1
Available only when the optional Multi Page Description Language Controller Module is installed.
*
2
Available only when the optional Printer Controller Module is installed.
*
3
Available only when the optional Hard Disk Drive Unit is installed.