Panasonic DP-180

60
Appendix
Type: Desk Top
Platen Type: Fixed
Acceptable Originals: Sheets (Max. FLS size, with the ADF only), Books
Copying Method: Laser Electrophotography
Fusing Method: Heat Roller
Imaging Method: 1 component non magnetic dry toner Contact Developing
Resolution: Max. 600 dpi
Operation Panel: LCD Display
Copy Size: A4 - A5 via Paper Tray / FLS - A5 via Sheet Bypass
Void Area: Max. 5 mm
Warm Up Time: Approx. 18 seconds (20°C/68°F)
First Copy Time: Approx. 10 seconds (A4, from 1st Tray)
Multi-Copy Speed: 18 cpm (A4 size)
Enlargement Ratios: Preset: 137%, 141%
Variable: from 101% to 200% in 1% increments
Reduction Ratios: Preset: 97%, 90%, 71%, 64%
Variable: from 99% to 50% in 1% increments
Paper Feed: Paper Trays (250 sheets Standard + 550 sheets Option) + Single Sheet Bypass
● Transparency film should feed from standard paper tray (Tray-1/ 20 sheets) and
Sheet Bypass (1 sheet).
Paper Weight: Paper Tray: 60 - 105 g/m
2
/ 75 - 90 g/m
2
(2-Sided Copy)
Bypass: 60 - 165 g/m
2
Quantity Selector: Max. 999 sheets (Output Tray capacity is 150 sheets
∗
)
Electrical Consumption: AC 220 - 240V, 50Hz/60Hz, 4A
Power Consumption: Max. 1000 W
Dimensions (W)(D)(H): 462 x 506 x 523 mm (with ADF)
Mass (Weight): 22 kg (with ADF)
Operating Environment: Temperature: 10 - 30°C
[Humidity should be 70% or less at 30°C]
Relative Humidity: 30 - 80%
[Temperature should be 27°C or less at 80%]
Tray Capacity: A4, A5 : 50 sheets (75 g/m
2
)
FLS: 30 sheets (75 g/m
2
)
Paper Size: A5/A4/FLS
Paper Weight: 50 - 110 g/m
2
Electrical Requirements: Supplied from the machine
■ DP-180 (For Copier)
Specifications
■ ADF (Standard)
∗
When used only with Panasonic's recommended A4 size paper.