61
UF-9000
APR 2006
Ver. 3.0
DP-180/190
(10) Remove 2 Screws (T9).
(11) Remove the Side Fuser Cover (1226).
(12) Remove 2 Screws (T9).
(13) Remove the Left Fuser Cover (1224).
(14) Remove 2 Black Screws (U5).
(15) Separate the Upper Fuser Unit.
(16) Remove the Pressure Roller (1205).
(17) Remove 2 Screws (V1).
Caution:
Exercise caution not to bend the Fuser Lamp
Terminal.
(18) Remove the Halogen Lamp (1209).
Note:
Do not Touch the glass portion of the Fuser Lamp
with bare hands. Grease from finger prints will
shorten its life cycle, use isopropyl alcohol to clean
finger prints.
To Next Page
Loading...
