Panasonic DP-190 - Key Operator Settings

38
Function
04 2-SIDED MODE DEF. Selects the default duplex priority mode. 1:OFF
1:OFF / 2:1→2 / 3:2→2
05 N in 1 DEF. Selects the N in 1 default mode. 1:ORIENTATION
Procedures: Select a Function <Sub-Function>
(ex: ORIENTATION) then, select a For
Sub Function (ex: PORTRAIT)
LEGAL/LETTER
1:ORIENTATION 1:PORTRAIT
When selecting orientation, there are original For INVOICE
sizes, LEGAL , LETTER , INVOICE ,
2:L-SCAPE
and INVOICE . You can change the original 2: LAYOUT
size with of cursor key. <Sub-Function>
<Sub Function> 1: 2 in 1
1:PORTRAIT / 2:L-SCAPE
<Sub-Function>
2:LAYOUT
1: L→R
<Sub Function>
1: 2 in 1 / 2: 4 in 1
<Sub Function: 2 in 1>
1:L→R / 2:R→L
<Sub Function: 4 in 1>
1:
12
34
/ 2:
13
24
/ 3:
21
43
/ 4:
31
42
06 N in 1 WITH FRAME
*
2
Selects whether to create the blank space 1:INVALID
between copy images.
1:INVALID / 2:VALID
*
2
Available only for 2 in 1 mode.
07 DIGITAL SKYSHOT Selects the default digital skyshot mode. 1:OFF
1:OFF / 2:ON
09 AUTO EXPOSURE Sets the auto exposure setting. 2:VALID
1: INVALID / 2: VALID
10 SORT PRIORITY ADF Selects the sort priority when using the ADF. 2:SORT
1:NON-SORT / 2:SORT
11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
12 1→2 BINDING DEF. Selects the binding location for 1→2 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
13 2→1 BINDING DEF. Selects the binding location for 2→1 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
19 KEY OPERATOR MODE Inputs the key operator password.
ENTER PASSWORD =
■ General Settings (For Key Operator) (Continued)
No.
Modes Function
Initial
Setting
■ Copier Settings
30 DEVICE NAME
*
1
Inputs the device name when required. Panasonic DP-190
(For Status Monitor/EtherTalk Machine Name)
31 DEVICE LOCATION
*
1
Inputs the device location when required.
(For Status Monitor)
No.
Modes Function
Initial
Setting
NOTE
*
1
When Parameter No 30 and 31 are set, cycle the power by turning the Power Switch on the Left Side of the
machine OFF and ON.