Panasonic DP-8035

192
Problem Solving
Verification Stamp
The Verification Stamp contains ink. When the stamp mark appears faded or hard to see, the stamp should be replaced, or refilled
with ink.
1
Open the ADF Tray.
2
Open the Inner Cover while holding the
green-labeled tab.
5
1. Remove by pulling the Stamp Assembly upward.
2. Remove the Stamp. Replace the stamp with a new one, or
refill the stamp with a few drops of the specified ink into the
back of the stamp.
Verification Stamp Order No.:
DZHT000027
NOTE
1. Please contact your local Authorized Panasonic Dealer to purchase a new stamp.