RQT6297
Basic operations
9
[CD] (MP3 discs)
This unit can play MP3 files recorded on CD-R/RW with a computer.
Files are treated as tracks and folders are treated as groups.
Remote control only
1 Press [TOP MENU] or [MENU].
A file list appears.
2 Press [3, 4] to select the track and press
[ENTER].
Play starts and continues to the last track in the last group.
≥“0” indicates the track currently playing.
To show other pages
Press [3, 4, 2, 1] to select “Prev” or “Next” and press [ENTER].
After listing all the tracks in one group, the list for the next group appears.
To close the file list screen
Press [TOP MENU] or [MENU].
Using the tree screen to find a group
1 Press [1] while a track is highlighted to display
the tree screen.
2 Press [3, 4] to select a group and press
[ENTER].
The file list for the group appears.
For your reference
Press [2, 1] to jump layers in the tree screen.
To return to the file list screen
Press [RETURN].
[Note]
≥Discs must conform to ISO9660 level 1 or 2 (except for extended
formats). MP3 files must have the extension “.MP3” or “.mp3”.
≥This unit is compatible with multi-session but if there are a lot of sessions
it takes more time for play to start. Keep the number of sessions to a
minimum to avoid this.
≥This unit is not compatible with ID3 tags.
≥This unit is not compatible with files with a sampling rate of 32 kHz.
[DVD-CV52] [DVD-CV47]
This unit can also play Windows Media Audio (WMA).
≥When creating a WMA disc, ensure the copyright feature is off.
≥WMA files must have the extension “.WMA” or “.wma”.
≥This unit can play WMA files with a compression rate of 48 kbps or more.
≥Noise may occur when playing WMA files.
≥There are some files this unit cannot play (e.g., copyright protected).
“TRACK PROTECTED” or “CANNOT PLAY THIS TRACK” appear on the
unit’s display to indicate such tracks.
Using menus to play MP3 discs
Naming folders and files
At the time of recording, prefix folder and file
names with 3-digit numbers in the order you
want to play them (this may not work at times).
Resume function
[DVD-V] [CD] [VCD]
(When the elapsed play time is displayed)
The position you stopped play at is recorded by the unit when “!” is
flashing on the display.
While “!” is flashing, press [1] (PLAY) to start play from where you
stopped it. (When playing DVD ➡ Chapter Preview below)
≥The position is cleared when the disc is changed or the unit is switched
to standby.
≥Press [∫] to clear the position.
Position Memory function
Remote control only
This function allows you to memorize a position to start from even after
switching the unit to standby or changing discs. You can memorize
positions on up to five different discs at a time. When you memorize
another position, the earliest position is replaced.
≥This function doesn’t work if the sequential mode is on.
1. During play, press [POSITION MEMORY].
2. Press [POWER Í] to switch the unit to standby, or change the disc.
3. When you are ready to play the disc again, press [1] (PLAY).
Play starts from the memorized position and the position is cleared.
(When playing DVD ➡ Chapter Preview below)
To clear the position
Press [∫] before recalling the memorized position.
Chapter Preview [DVD-V]
The message appears immediately
after you press [1] (PLAY).
Press [1] (PLAY) while the message is displayed and the beginning
portions of each chapter up to the current one are played. Full play
resumes from the point where you pressed [∫] or [POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (PLAY), the message disappears and play starts
from where you pressed [∫] or [POSITION MEMORY].
002
001
001
root
001.mp3
002.mp3
003.mp3
003
001.mp3
002.mp3
003.mp3
001.mp3
002.mp3
003.mp3
004.mp3
AUDIO
DVD
VIDEO
VR
CD
WMA
MP3
TRACK
CHAP
GROUP
TITLE
ASS
B
PG
DISC
2
1
3
4
5
To Next Page
Loading...
