Panasonic DVD-RV60 - Disassembling the Intermediate Chassis; Disassembling the Vertical Cam and Drive Gear; Disassembling the Pulley Gear and Deceleration Gear; Disassembling the Mechanism Loading

11.13. Disassembling the
Intermediate Chassis
1. Push the stopper downward, then rotate it until it contacts
the Vertical cam.
2. Release the 2 tabs.
11.14. Disassembling the Vertical
cam and Drive gear
1. Rotate the Vertical cam until it reaches the contact position.
2. Lift the Vertical cam straight upward to pull it out.
3. Remove the Drive gear.
11.15. Disassembling the Pulley Gear
and Deceleration Gear
1. Remove the screw.
2. Remove the pulley gear.
3. Remove the belt.
4. Remove the deceleration gear.
11.16. Disassembling the Mechanism
Loading P.C.B.
1. Remove the 2 screws.
2. Remove the 2 screws.
3. Release the 2 tabs.
25
DVD-RV60