Panasonic DVD-S325 - STEP 2 the Remote Control

RQTC0102
6
CO
Amplier with a built-in decoder or
a decoder-amplier combination
Coaxial cable
Enjoying multi-channel surround soundn
Change “DOWN SAMPLING”, “DOLBY DIGITAL”, “DTS” and “MPEG
Except Asia
”
(è page 17, “AUDIO” tab).
Connect the AC mains lead lastn
Batteriesn
Insert so the poles (4 and 3) match those in the remote control.
Do not use rechargeable type batteries.
Do not:
mix old and new batteries.
use different types at the same time.

take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the

Remove if the remote control is not going to be used for a long period of time. Store in
a cool, dark place.
Use
Aim at the remote control sensor (è page 8), avoiding obstacles, at a maximum range
of 7 m directly in front of the unit.
•
•
•
•
•
•
•
•
n
Connection to a television/The remote control
AC mains lead (included)
To household mains socket
AC IN
FOR THE MIDDLE EAST ONLY (EXCEPT UNITED ARAB EMIRATES)
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3 BEFORE
CONNECTION.
The Middle East except United Arab Emirates
Use the AC mains lead that matches the socket for area you live in.
Saudi Arabia
STEP 1 Connection to a television
STEP 2 The remote control
R6/LR6, AA