Panasonic DVD-S49 - Player Settings: Audio, Display, and Other Tabs; Audio, Display, and Other Settings Configuration

19
RQT8112
Changing the player settings
∫ “Audio” tab ∫ “Display” tab
∫ “Others” tab
§1
The original language designed on the disc is selected.
§2
Input a code number referring to the table (➜ page 20).
§3
If the language selected for “Audio” is not available, subtitles appear in that language
(If available on the disc).
PCM Digital Output
Check the digital input
limitations of the
equipment you
connect using
COAXIAL or
OPTICAL terminal
and select the
maximum sampling
frequency of
PCM
digital output.
Off: When not connected with COAXIAL or
OPTICAL terminal
Up to 48 kHz:
When connected to equipment compatible
with 44.1 or 48 kHz
Up to 96 kHz: When connected to equipment compatible
with 88.2 or 96 kHz
Up to 192 kHz: When connected to equipment compatible
with 176.4 or 192 kHz
≥Signals from copy-protected discs are converted to 48 or
44.1 kHz.
≥Some equipment cannot handle sampling frequencies of
88.2 kHz, even if they can handle 96 kHz. Read your
equipment’s operating instructions for details.
Dolby Digital
With COAXIAL or
OPTICAL connections
(➜ page 7 )
Bitstream
PCM
Select “Bitstream” when the
equipment can decode the
bitstream (digital form of multi-
channel data). Otherwise,
select “PCM”. (If the bitstream
is output to the equipment
without a decoder, high levels
of noise can be output and
may damage your speakers
and hearing.)
DTS Digital
Surround
With COAXIAL or
OPTICAL connections
(➜ page 7 )
Bitstream
PCM
Dynamic Range
Compression
Off
On: Adjusts for clarity even when the volume is low through
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with
Dolby Digital )
Speaker Settings
Choose the settings to
suit your audio system
and the listening
environment
(
➜ page 20, Changing
the speaker setting to
suit your speakers).
Speaker Type
Multi-channel
: when 3 or more speakers are connected.
2-channel: when 2 speakers are connected.
Multi-channel Setting (If you select “Multi-channel”)
Speaker presence and size
Delay time Channel balance
Menu Language English Français Español
On-Screen Messages On Off
Background during Play
Select background during JPEG,
MPEG4 and DivX video playback.
Black
Grey
FL Dimmer
Changes the brightness
of the unit’s display.
Bright Dim
Auto: The display is dimmed, but brightens only when you
perform some operations.
Auto Power Off On: The unit switches to standby mode after about 30
minutes in the stop mode.
Off
DivX Registration
Displays the unit’s
registration code.
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content (➜ page 12, About DivX
VOD content).
QUICK SETUP Yes No
Re-initialize Setting
This returns all values
in the Setup menus to
the default settings.
Yes: The password screen is shown if “Ratings” (➜ page 18)
are set. Please enter the same password. After “INIT”
on the display disappears, turn the unit off and on again.
No
19
RQT8112‑En.fmPage19Tuesday,July19,200510:53AM