EP-MA70
ORDER NO. HPD1102U24CE
- 36 -
6.14.6. Removing the Up/down shaft (Up/down shaft bolt)
＊ Remove the Massage mechanism block from the Massage chair before executing this work.
1. Remove the Up/down shaft bolt on the Pinion B/C with the 13mm-Box driver
and a Phillips screwdriver
Caution in installing
The Up/down shaft bolt may be broken if it is tightened too much.
Tighten the Up/down shaft bolt at 35-45kgfcm (350-450Ncm) with a torque wrench.
6.14.7. Removing the Grease cover
To Next Page
Loading...
