Panasonic EP-MA70

EP-MA70
ORDER NO. HPD1102U24CE
- 65 -
9.8. Display of malfunction analysis-4 [C8]
＊ If the display is 15 (Heater error).
①: If you push OK, the Heater lights.
②: When in the condition of ①,
1) If you push the Wider switch, the Heater arm(CN101) is shown when the
operation error occurred.
2) If you push the Narrower switch, the Heater arm(CN102) is shown when the
operation error occurred.
Caution: If the temperature is more than 99℃, it is shown 99℃.
Notes:
- The Sensor detects no change. Disconnection of Lead wires, Loose Connectors, or faulty Sensors
- The Sensor detects abnormal change. Partial disconnection of Lead wires, or faulty Sensors
- Sensor malfunction when the Switch is turned on. Any Rotation sensors are faulty.
＊When the Position sensors are faulty, it is detected as ‘’No change’’.