I (On)
4
Turn on the power and raise the
backrest to the upright position
5
Switch OFF the power
①
Set the power switch to the "O" (off)
position on the back of the main unit
②
Unplug the power plug from the wall
socket
①
Insert the power plug into the power outlet.
●
Always be sure to insert into an AC 220 V plug.
②
Confirm the power switch is set to the "I" (On)
position.
③
Press on the controller
twice.
●
Press it once, and then
press it again after the
screen appears.
Backrest will rise
automatically.
①
Unit Body
Rear Side
Watch your step to
prevent tripping on
power cord or the
like.
AC 220 V
After each massage, push the power switch on the unit
backside to the "O" (off) position and unplug the power
plug.
(To prevent breakage or injury from misuse by
children.)
Setting up the massage lounger
EN11
To Next Page
Loading...
