Error display
Error display Contents
U10
For safety reasons,action will automatically stop when it cannot detect if
someone is seated.
If this error occurs even if you are seated, press , sit further back in the
chair pressing your lower back against the seat back, and repeat the operation.
U20
If excessive load is applied to the sole roller, the operation will be terminated for
safety.
Press , then sit back down to avoid excessive load and operate again.
F03 ～ F39
There is malfunction inside the massage device.
Stop using and ask your dealer to inspect and repair the chair.
(Service and maintenance will be carried out smoother if the error number is
communicated when contacting.)
<Example of error
display>
EN50
To Next Page
Loading...
