O (off)
After completing the massage
Power switch section
Lift your soles
slightly and the sole
massage section returns.
2
Set the power switch to the
"O" (off) position on the back
of the main unit
3
Unplug the power plug
from the wall socket
1
Return backrest/legrest
4
Hang the comfort cushion on
the backrest
1) When the backrest and legrest angle is set to "Leave in place" (EN37)
①
Slide back the sole massage section completely
②
Press
Return the backrest and legrest
on the controller screen
Or, if the controller is turned off, press twice
2) When the massage is terminated with an abrupt
press of the stop button in the middle of the massage
①
Slide back the sole massage section completely
②
Press twice
●
The legrest is lowered automatically, the
backrest is returned to the upright position and
massage rollers or sole rollers as well as sole
rollers are stored at original positions.
When storage is complete, you will hear a
confirmation beep sound.
●
The backrest and legrest return automatically so that the user can
stand up safely, and the massage roller and sole roller move to the stow
position.
In the following cases, the return will not be automatic; you must return it
yourself.
When the sole massage unit is extended,
it will not be stored on the floor.
Slide the slide back completely.
After each massage, push the power switch on the unit
backside to the "O" (off) position and unplug the power
plug.
(To prevent breakage or injury from misuse by
children.)
Adjust the massage time
After completing the massage
EN39
To Next Page
Loading...
