Part names and functions of the controller
Controller
Screen displays during massaging operations
Press the indicated button to operate.
●
The power is turned OFF automatically if massage is not started and no operation is performed for about 3 minutes.
<Viewing screens>
The "Full body auto massage" course is used as an example for the screen displays shown below. Buttons and status
displays vary, depending on the selected course.
User display
ㅡ
The selected user is displayed.
(EN24 to EN27)
●
The display is not shown when
"Guest" is selected.
Returns to the
previous screen
Remaining time display button
(EN38)
Displays the action
being performed
(EN28)
Actions can be adjusted.
(EN31 to EN35)
Displays the course
(EN25 to EN27)
Option menu button
(EN36 to EN37)
Massage roller position
Toggle part display
(EN19)
Recline angle adjustment
button
(EN19)
Touch Panel
Confirmation sound:
"Beep"
Begin Massage
ㅡ
The controller turns on
●
The power is automatically turned off when the
massage operation is completed.
Ending the massage midway through
ㅡ
The legrest goes down automatically, the
backrest rises, and the massage rollers are
stored in the original positions.
Setting and canceling the child lock (EN19)
Press the button in case of emergency or feeling
abnormal sensations while in operations.
ㅡ
All actions then stop
●
The legrest, backrest, and massage rollers will not
return to their storing positions.
●
Get off the unit body, being careful not to tip over.
●
In order to use, press twice returning the
backrest and the massage rollers to their storing
positions, and then use again.
Confirmation
sound: "Beep"
The illustrations on the operation screen are explained in a black-and-white inverted display.
Emergency stop
button
OFF/ON button
EN18
To Next Page
Loading...
