Panasonic EP-MAN1 - Shoulder Roller Position Scanning; Scanning Process Overview; Body Scanning Preparation

Scanning of shoulder roller position
Scanning of shoulder roller position is the operation of estimating the shoulder position in order to ensure that
massaging is done matching with the body shape.
(Height range of scanning of shoulder roller position is about 140 cm to 185 cm.)
Scanning of shoulder roller position flow
Sit back so that your
hips are on the backrest
and lean back with your
head on the pillow
●
Shoulders should also be on the
backrest
●
Pillows can be positioned and
adjusted. (EN16)
While a beeping sound is being
made, the massage roller rises
along the spine to the vicinity of
the neck, and the massage roller
protrudes.
●
If the shoulder position is not
correct, repeat the action of
raising the massage roller again
and adjusting the shoulder
position.
The massage roller then slowly
lowers to the shoulder position
and the tapping action begins.
●
No scanning is made if operation
with only air is selected.
( See EN30 for air massage
operations.)
●
If you have adjusted the
reclining before use, the angle
will not change.
Reclines
around 25°
Raises
around 60°
Select a course
Otherwise, select a
body part and press
"OK".
The unit body moves
automatically and becomes
reclined to an angle
suitable for scanning.
Massage roller moves
automatically and
senses shoulder
position
EN22