8
Edit movements for each part of the body
after the massage starts.
●
If the user is registered, the contents set in program editing are also memorized.
Area: Neck and shoulder
selection
①
Press "Edit Program"
③
Selects whether to turn each
operation on or off
④
Press "Next location"
⑤
Turn on/off the operation to be
edited
⑥
Press "X" (Close) to exit.
②
Press
●
The current operation of the part
is displayed.
●
The currently executed operation is
framed (yellow).
(e.g., Neck squeeze-knead)
Repeat until the next action is
selected.
●
The shoulder program edit
screen will appear.
Example: If you select neck/shoulder for editing
●
If the massage of the same area continues for about 5 minutes, as if only one part is selected and
repeated, a "Beep" will sound and the massage roller will automatically move upward about 3 cm.
(May move downward, depending on the part)
●
The selected operation
is cut off and the next
operation is executed.
●
You can also press this button
when you want to exit during
part/operation selection.
It switches with each press.
ON OFF
When you want a massage with your favorite action
EN27
To Next Page
Loading...
