Function name
Contents Settings & adjusting method
Repeat
The currently
operating roller
massage is
repeated about
twice the number of
operations.
●
This may not be accepted if selected when an operation is switching to another operation.
●
is displayed during repeat.
●
The number of repetitions is the same whether pressed once or pressed twice or more times.
Skip
Suspend ongoing
roller massage and
move onto the next
operation.
●
This may not be accepted if selected when an operation is switching to another operation.
Back
intensity
Back intensity can
be adjusted in 5
stages.
●
Pressing "-" or "+" will not accept adjustments while strength display is blinking.
●
Refer to descriptions provided on EN46 for instructions when the highest
intensity setting is not strong enough or when the lowest intensity setting is too
strong.
●
The adjustment may not be accepted if selected when an operation is switching
to another operation.
Stretch
Perform one
stretching
movement of your
choice
●
The selected
operation is set
"On".
Selecting and pressing "OK" will perform one stretch operation that has been newly set to
"On".
Stretching operation with the setting "On" is also performed during the course.
※
●
When a user registers, the settings are memorized for each course. (EN24)
●
When multiple operations are newly set to "On", the order in which they are performed
cannot be set.
●
The timing of the stretching operation cannot be set during the course.
●
See EN29 for details of stretch actions.
※
If the setting "On" is made during the course, it may not be performed depending on
the progress of the original course operation.
Roller
position
adjustment
Roller positions
in vertical and
horizontal directions
can be adjusted.
Press to perform adjustments when adjusting positions of rollers for an ongoing
motion.
●
The maximum number of adjustments per operation is 3 per direction.
●
When "Beep-beep-beep" is heard, no further adjustment is possible.
●
Adjustment may not be possible depending on the place where the massaging is being
made.
It is possible to adjust to your liking the adjustments and settings, etc., during massaging.
The overall operation time does not change even if "Repeat", "Skip", "Stretch", or other adjustments are made
during massage.
When "Repeat" or "Stretch" is pressed: The course may not reach the last operation due to the time required by the adjustment.
the remaining time.
Details on available adjustments vary depending on the type. See EN31 for details.
Press "-" or "+".
Press "Repeat".
is displayed.
To Next Page
Loading...
