23
FR061
Before use
How to install
How to store
When drying / warming futon
on the bed
●Please put the product
on the floor.
Hose and Nozzle Power cord
When drying / warming futon on the floor
(tatami, carpet, wooden floor, etc.)
●Please put the product
in a stable and flat
place.
Requirements
●When drying / warming futon or drying small items on the
wooden or tiled floor, please spread out a large cotton blanket
under the futon or small items.
(Moisture may remain and cause condensation.)
Cotton blanket, etc.
Hose
Upper side hole
Bottom side hole
Cover
Projection of
the cover
Projection of the cover
Nozzle
●After stopping operation, disconnect the power plug, and store the hose, nozzle and power cord into the body.
Store the hose into the body.
Insert the
projection of
the cover to the
upper side hole
on the body.
Insert the
projection at the
bottom side of
the cover as well.
●Fold the power cord and store it into the power
cord storage.
Insert the projection on the cover into the hole
and push in until it clicks.
Align the mark of the nozzle with
the mark of the body.
Store the nozzle into the body.
When the cover of the power cord
storage comes off,
Projection
Hole
To Next Page
Loading...
