27
FR061
Operating methodsMaintenance
Maintenance
WARNING
Disconnect the power
plug before cleaning.
(The product may start operating
unexpectedly and electric shock
or injury may occur.)
CAUTION
Perform maintenance
after cooling down the
nozzle, hose and body.
(May cause burns.)
Before maintenance
●
Do not use the detergent
other than the neutral one
for kitchen purpose.
(Deterioration, deformation
or breakage of plastic parts may occur.)
● When using chemically treated cloth, follow its
instructions.
Filter cover
(small)
Filter (large)
Filter cover (large)
Filter (small)
Body
<About once a month>
Wipe with a soft wrung cloth.
Wiping with hard cloth may
scratch the surface.
●Wipe the power plug
with dry cloth.
Requirements
●Safely keep the parts removed from the product
when cleaning.
(Otherwise you may trip over them. Or the parts
may be damaged.)
When idle for a long time
Clean all the parts.
Store the hose, nozzle and the power cord into the body.
Cover the product with poly-bag, and keep in dry places.
Filter
<About once a month>
Remove dust
with a vacuum
cleaner etc.
How to remove
Open the filter cover
and remove the filter.
Remove the filter at
the opposite side in
the same way.
Put a finger on the cutout and pull it forward.
How to assemble
Filter
Filter cover
Hook
Hook
Insert the filter into
the hooks of the
filter cover.
Insert the projections
at the top of the filter
cover into the holes
on the body.
Insert the projections
at the bottom of the
filter cover into the
holes and push in
until it clicks.
Attach the filter into
the opposite side in
the same way.
●Hold the filter firmly
because it may be
sucked easily.
Hole
Hole Projection
Projection
Projection