22
Operating conditions
Notice
●Drying time depends on the type or size of futon and the ambient temperature or humidity.
It may take longer time to be dried.
●The guide of operation time is based on the following sizes of futon.
(Mattress…100×210 cm / Comforter…150×210 cm)
Please be sure to
hold the body handle
when carrying the
product.
Pull out the power plug from the lower
part of cover.
(Pinching the power cord between the cover and
the body may damage the power cord. )
Do not operate
with the nozzle
turned upward.
(Foreign objects entering
from the nozzle may
cause failure.)
WARNING
Do not do anything that may damage
the power cord.
(May cause electric shock or fire.)
Body handle
Do not put the product in
unstable places such as
on the mattress or bed.
(Otherwise, the product may fall
down and cause malfunction.)
Do not put any objects
on the futon.
(Because it may block the air
flow from the air outlet, no
effect may be obtained or
failure may occur.)
Do not operate with the
filter clogged.
Do not operate the product
if there is no filter installed.
(May prevent effective operation
or cause malfunction due to dust
entering the product.)
When drying or warming thin
comforter or blanket or the
like, put a light futon on it.
(Otherwise, no effect may be obtained.)
Close firmly the gap of
the futon to prevent the
air from leaking.
(Otherwise, no effect may be
obtained.)
When drying shoes, prop
them up in order that the
hot air enters inside the
shoes.
Do not put the product near TV or radio. (Otherwise, distortion or noises may occur.)
→Keep 1 m or more away from such devices.
Do not place any objects on the product. (Otherwise, malfunction or failure may occur.)
● Especially do not place a magnet or any metal objects on the product. (Otherwise, the built-in magnet may
detect turnover incorrectly and the product may not operate.)
Some material of the futon may be damaged by warm air. Before drying, please contact
the bedding manufacturers.
Do not use as a heater.
To Next Page
Loading...
