Panasonic GT05

6-26
6.7 GT12
6.7.1 General Specifications (GT12)
Item
Specifications
Rated voltage
24 V DC
Operating voltage range
21.6 to 26.4 V DC
Power consumption
1.7 W or less (70 mA or less)
Insulation method of
power supply part
Transformer insulation
Note1)
Ambient temperature
0 to +50 C
Ambient humidity
20 to 85% RH (at 25 C), non-condensing
Storage temperature
-20 to +60 C
Storage humidity
10 to 85% RH (at 25 C), non-condensing
Breakdown voltage
Note1)
Between [power supply terminals (+ and – terminals)] and [function earth
terminal]
500 V AC for 1 minute, Cutoff current 10mA (in initial status)
Insulation resistance
Note1)
Between [power supply terminals (+ and – terminals)] and [function earth
terminal]
100 M or more, 500 V DC, measured with megohmmeter (in initial
status)
Vibration resistance
5 to 9 Hz amplitude 3.5 mm,
9 to 150 Hz acceleration 9.8 m/s
2
,
10 sweeps each in X, Y and Z directions (1 octave/min)
Shock resistance
147 m/s
2
, 3 times on 3 axes
EC Directive applicable
EMC Directive: EN61131-2
Noise immunity
1000 V [P-P] or more, Pulse width 50 ns, 1s between power supply
terminals (based on in-house measurements)
Note2)
Protective construction
IP67 (Initial value, evaluated by us)
Dustproof and waterproof from front panel only (packing used on panel
contact surface)
Note3)
Weight
Approx. 240 g
Note1) Not isolated between the USB port, COM. port and the internal digital circuit.
Note2) When using our exclusive cable.
Note3) When installing the unit again, replace the water-proof packing.